Description
SPECIFICATIONS
Spark Quadcopter (Alpine White)
Performance | |
---|---|
Maximum Takeoff Weight | 10.6 oz / 300 g |
Maximum Speed | 31 mph (50 km/h) in Sport Mode without wind |
Maximum Ascent Speed | 9.8 ft/s (3 m/s) in Sport Mode without wind |
Maximum Descent Speed | 9.8 ft/s (3 m/s) in Auto Landing Mode |
Flight Ceiling | 13,123′ (4000 m) |
Flight Time | 16 minutes (no wind at a consistent 12.4 mph (20 km/h)) |
Hover Time | 15 minutes (no wind) |
Hovering Accuracy | Vertical: ± 0.3′ / 0.1 m (when Vision Positioning is active) or ± 1.6′ / 0.5 m” Horizontal: |
Flight Control System | |
---|---|
Supported Satellite Positioning Systems | GPS / GLONASS |
3D Object Detection | |
---|---|
Operating Range | 1 to 16′ / 0.2 to 5 m |
Operating Environment | Surface should be larger than 7.9 x 7.9″ (20 x 20 cm) and enable diffuse reflection, with reflection rate >20% |
Vision Positioning System | |
---|---|
Velocity Range | ≤22.4 mph (36 km/h) at 6.6′ (2 m) above ground |
Altitude Range | 0 to 26′ / 0 to 8 m |
Operating Range | 0 to 98′ / 0 – 30 m |
Operating Environment | Surface with clear patterns, enables diffuse reflection with >20% reflection rate |
Flight Control System | |
---|---|
Wi-Fi | Frequency: 2.412 to 2.462 GHz / 5.745-5.825 GHz |
Transmit Power | 2.4 GHz: 25 dBm 5.8 GHz: 27 dBm |
Radio Controller | |
---|---|
Maximum Transmission Distance | 2.4 GHz: 1.2 miles / 2 km (unobstructed, free of interference) 5.8 GHz: 1.2 miles / 2 km (unobstructed, free of interference) |
Transmit Power | 2.4 GHz: ≤26 dBm 5.8 GHz: ≤28 dBm |
Battery | Capacity: 950 mAh Voltage: 3.7 V |
Mobile Device Holder | Thickness Range: 0.3 x 0.3″ / 6.5 x 8.5 mm Max length: 6.3″ / 160 mm |
Camera | |
---|---|
Sensor | Type: 1.2/3″ CMOS Effective Pixels: 12 MP |
Lens | FOV 81.9° Focal Length: 25 mm (35 mm-format equivalent) Aperture: f/2.6 Focusing Distance: 6.6′ (2 m) to ∞ |
ISO Range | Video: 100 to 3200 Photo: 100 to 1600 |
Electronic Shutter Speed | 2 to 1/8000 second |
Video Resolution | 1920 x 1080 (Full HD) at 30p |
Photo Resolution | 3968 x 2976 |
Photo Modes | Single Shot Burst Shooting: 3 frames Auto Exposure Bracketing (AEB): 3 bracketed frames at 0.7 EV bias Interval: 2/3/5/7/10/15/20/30/60 seconds |
Maximum Video Bitrate | 24 Mbps |
File Formats | Photo: JPEG Video: MP4 (MPEG-4 AVC/H.264) |
Recording Media | Type: microSDHC/SDXC card up to 64 GB Format: FAT32 / exFAT
Note: Class 10/U1/V10 or faster card required (64 GB maximum size) |
Gimbal | |
---|---|
Number of Axes | 2-axis (pitch, roll) |
Control Range | Pitch: -85° to 0° |
Flight Battery | |
---|---|
Chemistry | Lithium-ion polymer (LiPo) |
Capacity | 1480 mAh / 16.87 Wh |
Voltage | 11.4 V |
Configuration | 3S |
Maximum Charging Voltage | 13.05 V |
Charging Temperature | 41 to 104°F / 5 to 40° C |
Weight | 0.2 lb / 95 g |
Charger | |
---|---|
Power Requirements | 100 to 240 V; 50/60 Hz at 0.5 A |
Output Power | 5 V / 3 A 9 V / 2 A 12 V / 1.5 A |
General | |
---|---|
Diagonal Size | 6.7″ / 170 mm |
Overall Dimensions | 5.6 x 5.6 x 2.2″ / 143 x 143 x 55 mm |
Operating Temperature | 32 to 104°F / 0° to 40°C |
Weight | Not specified by manufacturer |
Remote Controller for Spark Quadcopter
Compatibility | DJI Spark Phone holder supports devices between 0.26 and 0.33″ (6.5 and 8.5 mm) thick and up to 6.3″ (160 mm) long |
Frequency | 2.4 GHz / 5.8 GHz |
Transmission Distance | 2.4 GHz: 1.2 miles (2 km, FCC), 0.31 miles (0.5 km, CE), 0.31 miles (0.5 km, SRRC) 5.8 GHz: 1.2 miles (2 km, FCC), 0.19 miles (0.3 km, CE), 0.75 miles (1.2 km, SRRC) |
Operating Voltage | 950 mA, 3.7 V |
Operating Temperature | 32 to 104°F (0 to 40°C) |
Battery Capacity | 2970 mAh |
Battery Charging Hub for Spark Quadcopter
Compatibility | Spark Intelligent Flight Battery Model: MB1, 1480 mAh, 11.4 V |
Input Voltage | 13.05 V |
Input Current | 3.83 A |
Operating Temperature | 32° to 104° F (0° to 40° C) |
Charge Time | Approximately 90 minutes (with three batteries and Spark Battery Charger F1C50 Version 2) |
Weight | 0.14 lb (67.2 g) |
4730S Quick Release Folding Propellers for Spark Drone
Compatibility | DJI Spark quadcopter |
Prop Guard for Spark Quadcopter (4-Pack)
Compatibility | DJI Spark quadcopter |
Intelligent Flight Battery for Spark Quadcopter
Chemistry | Lithium-ion polymer (LiPo) |
Capacity | 1480 mAh / 16.87 Wh |
Configuration | 3S |
Voltage | 11.4 V |
Maximum Charging Voltage | 13.05 V |
Operating Temperature | 41 to 104°F / 5 to 40°C |
Weight | 0.2 lb / 95 g |