Description
FEATURES
Firmware Ver.5.00
Firmware Ver.5.00 – due July 2018
Enhanced Phase Detection AF
Latest updates to the AF algorithm provide the following performance enhancements
1. The low-light limit for phase detection autofocus has been improved by approximately 1.5 stops from 0.5EV to -1.0EV, raising the precision and speed of autofocus in low-light environments.
2. The range at minimum aperture has been expanded from F8 to F11. For example, even when using the XF100-400mmF4.5-5.6 R LM OIS WR with the teleconverter XF2X TC WR, phase detection autofocus can now be used.
3. Major improvements have been made to the AF-C performance while operating the zoom, which provides major benefits when shooting sports and other scenarios in which the subjects moves unpredictably.
4. Finely-detailed surface textures of wild birds and wild animals can now be captured at high speed and with high precision as a result of improvement in phase detection autofocus.
Addition of “Flicker Reduction”
For enhancing the quality of indoor sports photography, the upgrade allows users to reduce flicker in pictures and the display when shooting under fluorescent lighting and other similar light sources.
Addition of “Select Folder” and “Create Folder”
Enable to choose the folder in which subsequent pictures will be stored. And also enable to enter a five-character folder name to create a new folder in which to store subsequent pictures.
Enlarged and customizable indicators or information
The upgrade allows users to enlarge indicators and information in the viewfinder and/or LCD monitor. This upgrade will also enable users to customize the location of where the information is shown on the display.
Normal
LARGE INDICATORS MODE
LARGE INDICATORS DISP.SETTING
Firmware Ver.4.00
Addition of 4K video mode (excluding HDMI out)
The update adds 4K video using the X Series’ famous Film Simulation modes. You can input audio from an external microphone. (Excluding HDMI output for recording)
Support for tether shooting via USB or Wi-Fi
After connecting a camera to a computer, the compatible software* will enable users to transfer images taken with the camera to the computer and save them in a specified folder, or to control the camera from the computer.
New AF tracking algorithm for moving subject
Thanks to the newly developed image recognition algorithm, the update enhances AF-C to track moving subjects twice as fast as previous firmware. In addition, the update also enhances tracking to be able to capture up to 50% smaller moving subjects than before.
Support “FUJIFILM X RAW STUDIO”
Once connecting a camera to a computer via USB cable, the “FUJIFILM X RAW STUDIO” enables users to convert RAW files with X-Processor Pro. The first batch processing will also be available. The “FUJIFILM X RAW STUDIO” can be downloaded from the FUJIFILM website for free.
Improve radio flash controller usability
The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers.
Support for backup/restore of camera settings via FUJIFILM X Acquire
Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available.
Firmware Ver.3.10
Addition of “-6” and “-7” to EVF’s brightness setting
Additional options of “-6” and “-7” to the “EVF Brightness” setting so that, even in an extremely low-light condition, the brightness of the EVF does not distract you from shooting.
Function assignment to the Rear Command Dial
With the update, you can assign a specific function to be activated when the Rear Command Dial is pressed.
Firmware Ver.3.00
Shooting RAW in Bracketing and Advanced Filters
The update enables you to use the RAW format when shooting not only in AE Bracketing but also in other Bracketing modes (ISO, Dynamic Range, White Balance, Film Simulaitons) and also in Advanced Filter modes.
Extended ISO 125 and 160 selectable
The update adds ISO125 and ISO160 to extended ISO levels available.
Programmable long exposure of up to 15 minutes
Long exposure in the T mode currently goes only up to 30 seconds. The update will allow users to extend it up to 15 minutes.
“AUTO” setting added for the minimum shutter speed in the ISO Auto setting
The update adds an AUTO option for the minimum shutter speed in the ISO Auto setting, that allows the camera to automatically define the minimum shutter speed according to the focal length of the lens attached.
Faster “Face Detection AF”
The update enables the use of Phase Detection AF for faster performance in Face Detection AF.
Improved in-focus indication in the AF-C mode
The update reduces focus hunting in the AF-C mode, making it easier to track a subject.
Addition of smallest Focus Point size in Single Point AF
The update adds a smaller Focus Point size in Single Point AF, bringing the total number of available sizes to six. The new smallest size facilitates pin-point focusing.
Addition of “AF Point Display”
With the update, you can choose to have AF Points constantly displayed in Zone AF and Wide / Tracking AF, making it easier to track a subject.
Addition of “AF-C Custom Setting”
The update adds “AF-C Custom Setting” for specifying focus-tracking characteristics. Choose from five presets according to your subject’s type of movements.
Change of focus frame position while enlarging it
The update allows you to move the position of focus frame while enlarging it in Single Point in the AF-S mode or in the Manual Focus.
Addition of “Eye Sensor + LCD Image Display” in the View Mode
The update gives the “Eye Sensor + LCD Image Display” option in the View Mode that allows you to shoot through the viewfinder and check images on the LCD, just as you would with an SLR.
Shorter EVF display time-lag
The update shortens EVF’s display time-lag in the AF-C mode so that you will not miss a photo opportunity.
Name Custom Settings
The update allows you to assign a specific name to Custom Settings 1 – 7.
Copyright information in EXIF data
The update allows you to register the photographer’s name and the copyright holder’s name in advance so that the camera automatically adds the information to EXIF data for each image.
Voice Memo function
The update enable you to record 30-second “Voice Memo” clips in the Playback mode.
Extended AE Bracketing
The update extends AE Bracketing from the current 3 frames +/-2EV to up to 9 frames +/-3EV.
Addition of “Shoot Without Card” mode
With the update, you can have the “Shoot Without Card” mode turned OFF so that the camera can not shoot when there is no SD card inserted.
Firmware Ver.2.00
New AF algorithm
The new autofocus algorithm that is implemented on the FUJIFILM X-T2 is also implemented on the FUJIFILM X-Pro2. As a result, more accurate autofocus is now possible, and the AF tracking in AF-C mode will be improved. The number of focus point will be increased from 77 to 91 points (13×7) and from 273 to 325 points (25×13) to improve framing.
Compatibility with the hot-shoe mount flash EF-X500
Compatibility with the hot-shoe mount flash EF-X500 will enable wireless multi-flash lighting with TTL control up to three groups and high-speed flash sync.
Enhanced AUTO POWER OFF function
AUTO POWER OFF will now have 15 sec, 30 sec, and 1 min. options. AUTO POWER SAVE function, which was previously only available in ECONOMY mode, is now available as an option in HIGH PERFORMANCE and STANDARD modes to allow users to minimize battery power consumption.
AF point position interlocked with parallax will be displayed
AF point position interlocked with parallax will be displayed to provide a more accurate and easier-to-use Optical Viewfinder even when Corrected AF frame function is set to OFF.
Graphite Edition
Premium feel and functional beauty like never before
Integrated functions optimize creativity with intuitive designs for ease of use. Luxury and elegance fuse with excellence in design; Marrying design philosophies that cater purely to photo enthusiasts, this represents the apex of our 80-year history as leaders in photographic film.
A color of refined elegance
A sleek fusion between silver and black, this color changes tone depending on surrounding angles of light. Subtle and beautiful, this deep color can only be described as graphite. With a unique shimmer achieved through complex and intricate processes, graphite illuminates, enlightens and inspires.
Invoking sheer photographic pleasure…
Photographers have a fundamental desire to look directly at their subjects. The Hybrid Viewfinder is the world’s only viewfinder system that caters to all their desires. This viewfinder is featured only in select FUJIFILM X Series models, and is a constant reminder of the origins of photography.
An impeccable lens with the same stunning finish pairs perfectly with the FUJIFILM X-Pro2.
With a diagonal angle of view of 63.4 degrees, the XF23mmF2 R WR offers a viewing angle closest to that of the human eye. Staying true to form, it does not provide too strong of a perspective nor excessive bokeh. Because of those qualities, the artistry of creativity is placed directly in the hands of the photographer. When combined with the FUJIFILM X-Pro2 and its optical viewfinder, this lens showcases true depth and appeal.
FUJIFILM X-Pro2 Graphite Edition Original Bundled Lens and Accessory
The camera is sold together with the FUJINON XF23mmF2 R WR lens and LH-XF35-2 lens hood in the same graphite color as the body. Combining these together further increases the unity of the appearance and luxurious feeling of the camera, bringing users a mirrorless digital camera they will be proud to own.
Graphite color XF23mmF2 R WR
Graphite color LH-XF35-2
Image Quality
A commitment to photographic creativity, developed from more than 80 years of film production.
As a film manufacturer, Fujifilm has conducted exhaustive research into delivering photo quality results for more than 80 years. Without this experience, it would have been impossible to come up with the technical capability to reproduce colors and tones that emphasise the texture of the subject and deliver a three-dimensional look to images. The creative attributes of film that cannot be measured by resolution alone are alive and well in the FUJIFILM X-Pro2.
X-Trans CMOS III
The first model to feature a newly-developed sensor for outstanding image quality
The newly-developed 24.3MP X-Trans CMOS III APS-C sensor boasts the highest ever pixel count for an X Series camera. Combined with an XF lens, it delivers images with a perceived resolution far greater than the number of pixels used. In addition, the phase detection pixels have been positioned over a larger area for a faster, more precise phase detection AF performance. High ISO sensitivity performance has also been improved to the point that the whole sensitivity range — up to the maximum ISO 12,800 (Extended output sensitivity up to 51,200) — can now be used with confidence.
The sensor readout speed is now approximately twice as fast, delivering high-speed continuous shooting, precise AF tracking, playback and higher quality movies.
- 1:Microlenses
- 2:X-Trans Color Filter
- 3:L/R Light Interception Filter
- 4:Phase Detection Sensor / Green Filter Pixel
- 5:Photodiode
X-Processor Pro
New processing engine increases speed and image processing capabilities
The FUJIFILM X-Pro2 features a new CPU for high-speed processing. The Buffer memory has also been increased for an even faster response.
Thanks to the newly-developed X-Processor Pro engine, processing speeds are now approximately four times faster than a conventional model. This maximizes the capabilities of the X-Trans CMOS III sensor to ensure it delivers the highest image quality with super-fast response times. In addition, thanks to the high-speed reading technology of the sensor, the conventional EVF’s display speed of 54fps has been increased to a maximum of 85fps*. This substantially reduces the image delay phenomenon when tracking a moving subject. Blackout time after release has also been reduced by approximately half and compressed RAW is supported, improving the ease-of-handling of RAW data.
The FUJIFILM X-Pro2 features a new CPU for high-speed processing. The Buffer memory has also been increased for an even faster response.
Film Simulation
Using the knowledge gained from accurately reproducing color in film manufacturing, Film Simulation allows the user to change color and tone settings to match the subject, scene and creative intent, just as if shooting with a roll of film. There are a total of 15 modes including PROVIA / Standard, Velvia / Vivid and ASTIA / Soft.
ACROS
The FUJIFILM X-Pro2 features the new ACROS Film Simulation mode. Its features include smoother gradation, deep blacks and beautiful textures. Ultra high-quality monochrome images are possible, adding extra creativity to the general monochrome mode.
Grain Effect
The FUJIFILM X-Pro2 has the ability to reproduce graininess typically unique to film-based images. There are two strengths: Strong or Weak, which can be combined with each of the different Film Simulation modes. The effects are also possible through in-camera RAW development.
Compressed RAW
By using compressed RAW files, performance and functionality now meets the needs of professional photographers, including faster live view and even higher definition movies.
Finder
Advanced Hybrid Multi Viewfinder
Compose images in the viewfinder using one of three different viewing options
Photographers love looking through a viewfinder to take photos, which is why X Series models have used finders from the very start. Combining the advantages of both an OVF and an EVF, Fujifilm has perfected the Advanced Hybrid Multi Viewfinder with three viewing options. Now you can return to the roots of photography with the only viewfinder of its kind in the world.
Simple & Highly functional. Advanced hybrid multi viewfinder.
OVF/EVF switch lever
The advanced hybrid multi viewfinder allows you to switch between optical and electronic options with a single lever. The new electronic rangefinder feature is selected in the same way.
Electronic viewfinder (EVF)
Displays the LCD panel’s image and information
Optical viewfinder (OVF)
Displays LCD panel information on the optical image
Electronic rangefinder (ERF)
Displays the enlarged focus area on the optical viewfinder
Electronic Rangefinder
Electronic Rangefinder (ERF) simultaneously displays a small EVF window in the optical viewfinder.
Enlarged view of the focus area
The EVF is simultaneously displayed as a small window in the optical viewfinder. It can be displayed in three different ways: 100% field of view, 2.5x magnification and 6x magnification. This allows the user to check focus, the angle-of-view, exposure and white balance in real-time, even when taking photos through the OVF. As it can also be used with MF assist, precise MF is possible in the OVF mode.
Brand new interface
A new sophisticated design is used for the finder display. Screen information is now even easier to see.
Diopter Adjustment
Advanced optical viewfinder system
-4 – +2m-1
The optical design of the viewfinder has been improved, moving the eye point from 14mm on the previous model to 16mm. A diopter correction dial is also included, which makes the viewfinder even more comfortable to use.
Depth of Field Preview
The Depth of Field Scale can be selected for film reference display in addition to conventional pixel reference. With film reference, photo viewing from printing becomes a prerequisite for depth display, allowing the user to use it in a sense of depth of field similar to film photos.
Focusing
Focusing system combines fast and accurate AF with simple MF
Accentuate your subject. For photographers, focusing is an important job. Although AF now reacts faster than the human eye, the appeal and level of trust in MF will never disappear. Manually operating the focus ring to pick out a specific element in the frame is often crucial. Speed isn’t always everything.
Focus Lever
Focus Lever allows you to instantly change the focus area
The new Focus Lever on the back of the camera can be moved like a joystick in eight directions to instantly move the focus area. Now, rapid focus area changes can be made, even when composing an image. Not only is this available to move the AF point during AF mode, but it can also be used during MF mode to quickly move the enlarged display area when using MF assist.
Advanced MF Mode
Color Digital Split Image
The FUJIFILM X-Pro2 comes equipped with different types of MF assist including Digital Split Image, which is reminiscent of old rangefinders, and Focus Peaking where color is used to show the parts of the image that are in focus.
Phase Detection AF area expanded to 7×7
The number of selectable focusing points has been expanded from 49 on previous models to 91*. Approximately 40% of the imaging area is now covered by fast, precise phase detection AF pixels, which means focusing speeds when photographing moving subjects have improved dramatically.
Operability
A body design that maximizes practicality
No photographer wants to take their eye from the viewfinder for fear of missing the perfect shot. With this in mind, key design aspects have been concentrated on the camera’s right side. The major exposure settings are available on a dial for quick fingertip control. Changes can also be made while the camera is switched off, so users will always be ready for the next photo opportunity. Thanks to the simplicity of the FUJIFILM X-Pro2, you’ll soon be creating masterpieces.
Exposure Compensation
Exposure compensation dial in the C position
As it’s used so frequently, exposure compensation has been made into a dual-purpose dial. Compensation up ±3 stops in 1/3 steps is possible even with the camera to your eye thanks to the dial’s knurled shape. But if the C position is selected, exposure compensation of up to ±5 stops is possible using the front command dial.
Dual-Function ISO Dial
One dial for both ISO and shutter speed
The shutter speed and ISO dials have now been combined into one dial, which is reminiscent of those found on old film cameras. Changing the ISO is done by lifting the outer portion of the dial. Now all exposure settings can be performed with dials.
Front Command Dial
For more comfortable handling
The FUJIFILM X-Pro2 features a new front command dial. It is used to set intermediate shutter speeds that are not available on the shutter speed dial when shooting in Manual or Shutter Speed Priority modes. It’s also used to shift programmed exposure combinations when shooting in Program mode.
Great versatility
Highly customizable menus
A maximum of 16 frequently used items can be registered to the new My Menu feature. When combined with the 16 items from the Q Menu, a total of 32 shortcuts can be created.
Reliability
The FUJIFILM X-Pro2 will allow field photography without the typical worries about weather, season or environment.
Reliability is one of the most important considerations when choosing a camera, regardless of where you are and what type of scene you want to photograph. That’s why the camera body of FUJIFILM X-Pro2 is made from magnesium and designed to be dust-resistant, splash-resistant and freeze resistant up to -10°C, along with a highly durable focal plane shutter and dual card slot.
Durable magnesium body
Coated in the same semi-gloss paint as the X-Pro1, the luxurious body of this new flagship model is made from highly robust magnesium alloy, which feels both solid and reliable in the hand. The dials are milled from aluminum and operating with a re-assuring click.
Dual SD Card Slots
Images can be copied between SD cards within the camera, making image data backup possible without a PC.
The FUJIFILM X-Pro2 is the first mirrorless camera to offer dual SD card slots for highly reliable data storage. Slot 1 is compatible with UHS-II standards for excellent write speeds. One of three recording methods can be selected: sequential, backup and RAW / JPEG sorting.
1/8000 sec. Shutter Speed
Focal plane shutter with a maximum speed of 1/8000 sec.
The FUJIFILM X-Pro2 comes equipped with a focal plane shutter boasting a durability of 150,000 shots, a maximum speed of 1/8000 sec and a flash sync speed of 1/250sec. Furthermore, the camera also includes an electronic shutter with completely silent operation and a maximum speed of 1/32,000 sec, allowing users to select maximum apertures even in bright conditions.
Functions
Workflow software
By installing compatible software on your computer, it is possible to build an all-in-one workflow for things like “tethered shooting – checking the image – RAW development preview – RAW development”. In addition to FUJIFILM’s own software, you can use software that you are already familiar with. You can carry out tethered shooting by connecting the FUJIFILM X-Pro2 via USB cable or Wi-Fi connection through wireless LAN access point. Also, RAW files can be developed based on Film Simulation settings
Capture One Pro / Capture One Pro FUJIFILM (Optional)
Capture One Pro FUJIFILM is workflow software that inherits the versatile and powerful editing capabilities of Capture One Pro but is specifically designed for the GFX and X Series of cameras*. It is available to purchase from Phase One’s website. The Capture Pilot function allows you to connect the camera to a table device, etc. and view/check an image being captured wirelessly on such devices.
Capture One Express FUJIFILM
This software supports RAW conversion for files from the GFX and X Series range of cameras*. The software uses a unique cataloging format to manage pictures, enabling fast processing of individual images regardless of the quantity or size. FUJIFILM’s unique Film Simulation modes can be applied during RAW conversion so that you can add an artistic flair or traditional film look and feel. This RAW conversion software is available as a free download from Phase One website.
FUJIFILM X Acquire + RAW FILE CONVERTER EX 3.0 powered by SILKYPIX
FUJIFILM Tether Shooting Plug-in PRO** + Adobe® Photoshop® Lightroom® Classic CC**
FUJIFILM X RAW STUDIO
This is unique RAW development software from FUJIFIILM. By connecting a computer installed with X RAW STUDIO and camera via USB cable, the processor in the camera can be used to process RAW files. Processing time will not be affected by any limitations of your computer, and there is no difficulty in batch processing large number of images. Since it offers an optimized environment for the X Series, you can get complete image quality includes tone, color reproduction, and Film Simulations.
Focus with a Touch with the new smart application – FUJIFILM Camera Remote.
With the new dedicated “FUJIFILM Camera Remote” application, you can focus and trigger the camera release from your smartphone or tablet. The app not only lets you adjust focus, but also control settings like shutter speed, aperture, exposure compensation and ISO sensitivity. You can even apply other settings like Film Simulation, self-timer, and flash while “Touch AF” lets you focus from your phone or tablet, too. Imagine all the situations where this smart assistant will come in handy! Take commemorative group photos with yourself in the shot, capture wildlife photos, or remotely release the shutter for night shots free from camera shake.The photographic possibilities are endless.
Share every moment via email and SNS with easy wireless transfer to your smartphone.
For easy wireless transfer of photos to your smartphone or tablet just download the free dedicated “FUJIFILM Camera Remote” application to your device. There’s no need to enter an ID, password or to change other troublesome settings; with just a touch of a button, you can transfer your high-quality images to your phone or tablet ready to upload to your blog or social networking site.
Use your smartphone to browse and transfer photos and movies from your camera.
Using your smartphone or smart tablet, you can view the images stored in your camera, and then select and transfer the ones you want.
*In the case of the iOS version of FUJIFILM Camera Remote, you may not be able to save movie files that cannot be played on the smartphone. Use the movie size setting HD (1280 x 720) or smaller to avoid this problem.
Transfer up to 2GB at one time.
You can select and transfer up to 2GB at a time to your smartphone and to make them even easier to send and use on your device, you can copy them in their existing photo size or choose the “3M compressed image option”.
Send location data from your smartphone to you camera
Just download and install the free FUJIFILM Camera Remote application in your smartphone and you can set up your camera to acquire location data from your smartphone and geotag your images — that way you’ll remember exactly where they were shot.
Automatically transfer and save photos on your PC via Wi-Fi®***
Just turn on your PC and select PC AutoSave from the camera’s menu for effortless wireless transfer and saving of your photos and movies to your home PC.*4
*Wi-Fi CERTIFIED logo is a certification mark of the Wi-Fi Alliance.
Movie shooting
Frame rates can be selected from 60fps, 50fps, 30fps, 25fps and 24fps for Full HD movies, supporting worldwide motion picture formats. It is also possible to change the settings of aperture, shutter speed, and exposure compensation while shooting a movie. Just as with still images, program, aperture priority, shutter priority and manual modes can be selected, as well as film simulation modes. Various expressions can be enjoyed such as a documentary style with CLASSIC CHROME.
Multiple exposure
The camera supports multiple exposure capture, which allows you to take two frames and combine them for an artistic effect. You can display the first shot on the LCD screen while framing and shooting the second for perfect alignment. Film Simulation effects also apply in this mode.
Wide selection of Auto Bracketing functions
With a choice of 5 different auto bracketing functions (AE, ISO Sensitivity, Dynamic Range, Film Simulation and White Balance), you are ready to explore a whole world of photographic effects with just one press of the shutter.
White Balance Bracketing
Just fire the shutter once and capture the same scene at your selected white balance setting plus one frame at a warmer and another at a cooler color temperature. White Balance bracketing can be set in ±1, ±2 and ±3 steps.
Dynamic Range Bracketing
Capture 3 exposures of the same scene with high-speed continuous shooting, each at a different dynamic range setting (100%, 200% & 400%).
Film Simulation Bracketing
Just press the shutter once and get three images of the scene based on a single exposure, each image with a different Film Simulation effect that you have selected.
AE Bracketing
One press of the shutter captures up to 9*5 shots of the same scene at different exposures. AE bracketing can be set in ±3*5, ±2, ±5/3, ±4/3, ±1, ±2/3, ±1/3 EV steps.
ISO Sensitivity Bracketing
Based on a single exposure, the scene is automatically reproduced as three images, each with a different ISO sensitivity, but without altering the shutter speed and aperture. This lets you capture the moment with varying degrees of brightness, but leaves depth-of-field and shutter effects unchanged. ISO Sensitivity Bracketing is possible in ±1/3, ±2/3 or ±1 EV steps.
Advanced Filters
Create unique images by using one of eight Advanced Filters. Effects include Toy Camera for a retro look, Miniature for creating a diorama effect, and Pop Color for high contrast and saturation. You can preview the effect through the viewfinder or on the LCD screen.
Toy Camera
Miniature
Pop Color
High Key
Low Key
Dynamic Tone
Soft Focus
Partial Color (Red/Orange/Yellow/Green/Blue/Purple)
SPECIFICATIONS
Model Name | FUJIFILM X-Pro2 |
---|---|
Number of effective pixels | 24.3 millions pixels |
Image sensor | 23.6mm x 15.6mm(APS-C)X-Trans CMOS III with primary color filter.
|
Storage media | SD memory card(up to 2GB) / SDHC memory card(up to 32GB) / SDXC memory card( to 256GB) UHS-I/UHS-II(Only Slot 1)*1 |
File format |
|
Number of recorded pixels | L: (3:2) 6000 x 4000 / (16:9) 6000 x 3376 / (1:1) 4000 x 4000 M: (3:2) 4240 x 2832 / (16:9) 4240 x 2384 / (1:1) 2832 x 2832 S: (3:2) 3008 x 2000 / (16:9) 3008 x 1688 / (1:1) 2000 x 2000 |
Lens mount | FUJIFILM X mount |
Sensitivity | AUTO1 / AUTO2 / AUTO3(up to ISO12800) / ISO200 to 12800(1/3 step)(Standard Output Sensitivity) Extended output sensitivity : ISO100 / 125*3 / 160*3 / 25600 / 51200 |
Exposure control | TTL 256-zone metering, Multi / Spot / Average / Center Weighted |
Exposure mode | P(Program AE) / A(Aperture Priority AE) / S(Shutter Speed Priority AE) / M(Manual Exposure) |
Exposure compensation | -5.0EV – +5.0EV, 1/3EV step (movie recording : -2.0EV – +2.0EV) |
Image Stabilizer | Supported with OIS type lenses |
Shutter speed |
|
Continuous shooting | Approx. 8.0 fps(JPEG : 83 frames Lossless compression RAW : 33 frames Uncompressed RAW : 27 frames) Approx 3.0 fps(JPEG : endless Lossless Compression RAW : endless Uncompressed RAW : 36 frames)
|
Auto bracketing | AE Bracketing(±3EV*3 / ±2EV / ±5/3EV / ±4/3EV / ±1EV / ±2/3EV / ±1/3EV) Film simulation bracketing(Any 3 types of film simulation selectable) Dynamic Range Bracketing (100% · 200% · 400%) ISO sensitivity Bracketing (±1/3EV / ±2/3EV / ±1EV) White Balance Bracketing (±1 / ±2 / ±3) |
Focus |
|
White balance | Automatic Scene recognition / Custom1 to 3 / Color temperature selection(2500K – 10000K) / Preset : Fine, Shade, Fluorescent light (Daylight), Fluorescent light (Warm White), Fluorescent light (Cool White), Incandescent light, Underwater |
Self-timer | 10 sec. / 2 sec. Delay |
Interval timer shooting | Yes (Setting : Interval, Number of shots, Starting time) |
Flash modes |
|
Hot shoe | Yes (Dedicated TTL Flash compatible) |
Viewfinder |
|
LCD monitor | 3.0-inch, aspect ratio 3:2, approx 1.62 millions dots |
Movie recording | [4K*5 (3840×2160)] 29.97p / 25p / 24p / 23.98P, 100Mbps Continuous recording : up to approx. 10 min. [Full HD (1920×1080)] 59.94p / 50p / 29.97p / 25p / 24p / 23.98P, 36Mbps Continuous recording : up to approx. 15 min. [HD (1280×720)] 59.94p / 50p / 29.97p / 25p / 24p / 23.98P, 18Mbps Continuous recording : up to approx. 30 min.
|
Film Simulation mode | 15 modes (PROVIA / Standard, Velvia / Vivid, ASTIA / Soft, CLASSIC CHROME, PRO Neg.Hi, PRO Neg.Std, Black& White, Black& White+Ye Filter, Black& White+R Filter, Black& White+GFilter, Sepia, ACROS, ACROS+Ye Filter, ACROS+R Filter, ACROS+G Filter) |
Dynamic range setting | AUTO, 100%, 200%, 400% ISO restriction(DR100% : No limit, DR200% : ISO400 or more, DR400% : ISO800 ore more ) |
Advanced filter | Toy camera / Miniature / Pop color / High-key / Low-key / Dynamic tone / Soft focus / Partial color (Red / Orange / Yellow / Green / Blue / Purple) |
Wireless transmitter |
|
Wireless function | Geotagging, Wireless communication (Image transfer), View & Obtain Images, Remote camera shooting, PC Autosave, instax printer print |
Other functions | Exif Print, PRINT Image Matching II, Language(35 languages including JP / EN), Time difference, exposure preview on LCD during Manual mode, EVF brightness, EVF color, LCD brightness, LCD color, Mode effect on monitor, Customize, Copyright info*3 |
Terminal |
|
Power supply | NP-W126 Li-ion battery (included)
|
Dimensions | 140.5mm (W) x 82.8mm (H) x 45.9mm (D) / 5.5in. (W) x 3.3in. (H) x 1.8in. (D) (Minimum depth: 34.8mm / 1.4 in.) |
Weight | Approx. 495g / 15.7 oz. (including battery and memory card) Approx. 445g / 17.5 oz. (excluding accessories, battery and memory card) |
Operating Temperature | -10°C – +40°C / +32°F – +104°F |
Operating Humidity | 10 – 80% (no condensation) |
Starting up period | Approx 0.4sec. |
Memory Card Capacity and Image Quality / Size
All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored.
Modes | Still image (L) | ||
---|---|---|---|
Number of recorded pixels | 6000 x 4000 (3:2) | ||
Quality | JPEG FINE | JPEG NORMAL | |
SDHC memory card | 8 GB | 540 | 800 |
16 GB | 1110 | 1660 |
Modes | RAW | ||
---|---|---|---|
Quality | UNCOMPRESSED | LOSSLESS COMPRESSED | |
SDHC memory card | 8 GB | 150 | 300 |
16 GB | 320 | 630 |
Modes | Movie | ||
---|---|---|---|
Quality | FULL HD (1920 x 1080) 60p / 30p | HD (1280 x 720) 60p / 30p | |
SDHC memory card | 8 GB | 26 min. | 51 min. |
16 GB | 54 min. | 105 min. |
- *For 4K movie recording, use a card with UHS Speed Class 3 or higher.
- *Individual movies cannot exceed apporx. 10 min. on 4K mode, approx. 14 min. on Full HD mode, and approx. 28 min. on HD mode in length.